Hydraulic Pump Station for Concrete Mixing Plant

• Customization: Available
• Transport Package: Standard Package
• Trademark: Lizheng Machinery
• Model NO.: convention
• Production Capacity: 40000pieces/Year

Product Description

A hydraulic pump station, also known as a hydraulic station, works as follows: the motor drives the oil pump to rotate, and the pump absorbs oil from the oil pump and pumps it out, converting mechanical energy into pressure energy of hydraulic oil. The direction is controlled by a hydraulic valve through an integrated block (or valve combination), and the pressure and flow are adjusted. The pressure and flow are then transmitted to the hydraulic cylinder or oil motor of the hydraulic machinery through an outer pipe, thereby controlling the direction, force, and speed of the hydraulic motor to drive various hydraulic machinery to do work. The starting of the oil pump motor in a hydraulic pump station, like other machinery, requires starting with no load (unloading), waiting for a short period of time, and then loading the motor. Generally, it is not advisable to start or stop the motor frequently during operation. When starting at low temperature, it is necessary to adjust the overflow valve to 1/2, and then repeatedly jog the motor to fully overflow the overflow valve, heat the hydraulic oil, and when the temperature rises to around 20 ºC, put it back into normal operation. The wiring of the hydraulic pump station and the external electrical control line of the hydraulic pump station are introduced into the electrical box. Please pay special attention to the direction of motor rotation, which should be consistent with the arrow direction marked on the oil pump. The control voltage of solenoid valve: Generally, the AC solenoid is~220 V, and the DC solenoid is 24 V. The control voltage must be consistent with the display on the solenoid nameplate. Electromagnetic valves with memory elements should be powered on for a short period of time. Like a miniature hydraulic station. The oil consumption of the hydraulic pump station is recommended to be 32 # and 46 # anti-wear hydraulic oil. The most suitable oil temperature is 30-55 ºC. When the oil temperature is below 15 ºC or above 60 ºC, it is strictly prohibited to operate. Heating or cooling in advance can be used to adjust the oil temperature. Hydraulic oil should be replaced every 1 to 6 months, and the oil tank should be cleaned to remove dirt and dust. The most important thing in hydraulic transmission is to avoid dirty and deteriorated oil, otherwise dust will stick to the oil suction filter, increase noise, and reduce the service life of the oil pump. Therefore, it is necessary to keep the oil clean regularly. Changsha Lizheng Engineering Machinery Co., Ltd. is a professional hydraulic system manufacturer engaged in the design, research and development, and production of hydraulic pump station products. The products are widely used in the engineering machinery industry, mining machinery industry, environmental protection industry, lifting machinery industry, metallurgical industry, power industry, etc.